Use And Maintenance Of Stainless Steel Kettle

1, stainless steel electric kettle rated power is generally larger, power plug, socket, power cord capacity should be selected appropriate, generally should choose 10A specifications, if the rated power more than 2200W, should use larger specifications of sockets, in addition these sockets should be used independently to ensure safety.

2. The plug of the stainless steel electric kettle usually has a grounding electrode, which should be connected with the socket with the grounding socket. When in use, the power plug should be fully inserted into the outlet.

3. Always keep the power plug, socket, power cord and automatic switch device of the stainless steel electric kettle dry and clean.

4. The water injection should not exceed the highest water level line to avoid overflowing the outside of the pot when the liquid boils. Water injection should not be too little, otherwise it will be quickly burned dry, especially the whistle stainless steel electric kettle, at least so that the water immersion heating tube more than 20mm, otherwise the electric heating pipe is easy to expose the water surface and burn out. In addition, pay attention to not connect the power first and then fill the water, otherwise it is easy to burn out the heater or cause dangerous accidents.

5. When using stainless steel electric kettle, someone should take care of it and avoid dry burning. If no one takes care of it, after the water is boiled, the whistle kettle of the infinite thermostat will always boil the water dry, and the electric kettle equipped with the thermostat that can automatically reset the thermostat will also boil the water dry due to repeated heating, and if the overtemperature protection function fails, it will lead to a fire accident.

6. When using stainless steel electric kettle, be careful not to let children touch the kettle body or touch the power cord to avoid accidents such as scalds.

7. The stainless steel electric kettle that is still connected to the power after just boiling is easy to cause danger when flushing or brewing drinks Stainless steel electric kettle. In order to avoid boiling water scalds, the plug should be unplugged first, cut off the power supply and then take boiling water to ensure safety.

8. When cleaning, the automatic stainless steel electric kettle cannot be immersed in water or rinsed with water, so as not to damage the electrical insulation due to moisture, causing faults and leakage.

9. The stainless steel electric kettle has been used for a long time, and there is scale on the surface of the electric heating pipe. Scale not only affects the thermal efficiency, but also causes a sharp increase in heat in the tube, damaging the electric heating tube. Therefore, it should be checked regularly and cleaned according to the instructions.

10. Do not repair the stainless steel electric kettle by yourself. During use, if the appliance is damaged and cannot work normally, do not disassemble the shell for repair, and should be sent to the repair shop or the manufacturer of the product for repair.